JSRGO® Silicone Heater installation instruction, please click link below:
JSR Heater Installation Manual
Any questions, please contact: enquiries@jsr2.com
Flexible Silicon Rubber Heating Pad/Sheet has advantages of thinness, lightness, sticky and flexibility.
It can improve heat transfer, accelerate warming and decrease power under the process of operation.
They are heating fast and thermal conversion efficiency high.
Silicone Heater Technical Data:
Supply Voltage: | 0~400v, let us know if you need other voltages. |
Insulation Material: | Silicone Rubber Coated Fiberglass |
Max Operating Temperature: | 260 degree C or 500 Degree F |
Max Power Density: | 5w/sq.cm depending on application |
Heating Elements: | Wire Wound or Etched Foil. |
Resistance Tolerance: | about +/- 5% |
Thickness: | 1.5mm |
Flammability: | Flame retardant |
Thermal Protection: | On board thermal fuse, thermostat, thermistor and PT100 are available as part of your thermal management solution. |
Power leads: | High temperature PTFE or Silicone insulation leads |
Thermostat Specifications:
Model: KSD9700
Switch Type: Normally Open/Normally Closed
Material: Metal Shell/Plastic Shell
Product Specification: Metal 20mm*7.4mm*3.8mm/Plastic 20mm*8.0mm*4.0mm
Rated voltage: 250V
Overload current: 5A
Normal Electrical Intensity: > 800V
Normal contact resistance: <50m
Insulation Resistance: > 100M
Response speed: <1 C/min
Life times: > 10000 or more
Action temperature: 20 degree C-180 degree C (error (+3 degree C/+5 degree C)
Reset temperature: 10 C-140 C (error < 15 C)